Gobius 液位显示(水,油,柴油,汽油,粪便)
Gobius是世界首家也是唯一可以从外部测量任何材料容器中物质含量的测量设备,如塑料,钢,不锈钢,铝,玻璃纤维容器等。因而也不需要在容器上开孔。
安装并使用只需30分钟Installed and ready to use in 30 minutes!
智能专利技术Smart Patented Technology
每个容器上的传感器由振动器和加速器组成。振动器产生振动,加速器将测量振动并发送信号到控制单元。控制单元计算并判断液面位置。
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit. The control unit then starts to calculate in order to give an exact estimate of whether the fluid level has passed the sensor or not.
易于修正Easy to calibrate
不是所有容器类似,总在尺寸,结构,厚度,使用年限上有差别。为了补偿差别,在试用期需要对容器进行修正。然而所有你需要做的仅仅是按一下按钮,几秒的时间。
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds; all you need to do is to press a button.
极低功耗,小于40mAExtremely low electricity consumption, less than 40 mA
Gobius具有极低功耗并高效。Gobius向传感器输送脉冲电流而不是持续电流,从而节省12-24V电池电量。
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft抯 12-24 Volts battery.
CopyRight ©2020 上海孜胜机械科技有限公司 All rights reserved
地址:上海市浦东新区浙桥路289号碧云公馆2座1405室 邮编:201206 电话:+86 6168 2673 传真:+86 021 61682675